中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 43117-2023 玻璃纤维增强热固性塑料(GRP)管 湿态或干态条件下环蠕变性能的测定(中英文版) Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions |
|||
GB/T 43308-2023 玻璃纤维增强热塑性单向预浸料(中英文版) Glass fiber reinforced thermoplastic unidirectional prepreg |
|||
GB/T 41312.2-2023 化工用设备渗透性检测方法 第2部分:纤维增强热固性塑料设备(中英文版) Permeability testing methods for chemical industry equipment Part 2: Fiber reinforced thermosetting plastic equipment |
|||
GB/T 38725.2-2020 可盘绕式增强塑料管 第2部分:纤维增强热塑性塑料连续管(中英文版) Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe |
|||
GB/T 39549-2020 纤维增强热固性复合材料化粪池(中英文版) Fiber reinforced thermosetting composites septic tank |
|||
SL/T 805—2020 水工纤维混凝土应用技术规范(中英文版) Technical specification for the application of hydraulic fiber reinforced concrete |
|||
GB/T 3857-2017 玻璃纤维增强热固性塑料耐化学介质性能试验方法(中英文版) Test method for chemical resistance of glass fiber reinforced thermosetting plastics |
|||
GB/T 35544-2017 车用压缩氢气铝内胆碳纤维全缠绕气瓶(中英文版) Fully-wrapped carbon fiber reinforced cylinders with an aluminum liner for the on-board storage of compressed hydrogen as a fuel for land vehicles |
|||
SY/T 6770.5-2016 非金属管材质量验收规范 第 5 部分:纤维增强热塑性塑料复合连续管(中英文版) (Specification for acceptance of non - metallic pipes - Part 5: Fiber reinforced thermoplastics composite continuous tubes) |
|||
SY/T 6769.5-2016 非金属管道设计、施工及验收规范第 5 部分:纤维增强热塑性塑料复合连续管(中英文版) (Specification for design, construction and acceptance of non - metallic pipes - Part 5: Fiber reinforced thermoplastics composite continuous tubes) |
|||
GB/T 32491-2016 玻璃纤维增强热固性树脂管及管件长期静水压试验方法(中英文版) Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings |
|||
SY/T 4130-2016 玻璃纤维增强热固性树脂现场缠绕立式储罐施工规范(中英文版) Specification for construction of glass fiber reinforced thermosetting resin on-site winding vertical storage tanks |
|||
GB/T 31956-2015 建筑用玻璃纤维增强酚醛树脂板(中英文版) Glass fiber reinforced phenolic polymer panel for the construction |
|||
YD/T 1181.1-2015 光缆用非金属加强件的特性 第1部分:玻璃纤维增强塑料杆(中英文版) (Non-metallic strength members of the cable properties - Part 1: Glass fiber reinforced plastic rods) |
|||
JC/T 587-2012 玻璃纤维缠绕增强热固性树脂耐腐蚀立式贮罐(中英文版) Filament wound glass fiber reinforced thermoset resin corrosion resistant vertical tanks |
|||
JC/T 718-2012 玻璃纤维缠绕增强热固性树脂耐腐蚀卧式贮罐(中英文版) Filament wound glass fiber reinforced thermoset resin corrosion resistant horizontal tanks |
|||
CJ/T 399-2012 聚氨酯泡沫合成轨枕(中英文版) Synthetic sleepers of fiber reinforced polyurethane foam |
|||
GB/T 26735-2011 玻璃纤维增强热固性树脂喷淋管(中英文版) Glass fiber reinforced thermosetting resin spray pipe |
|||
SY/T 6769.1-2010 非金属管道设计、施工及验收规范 第1部分:高压玻璃纤维管线管(中英文版) Specifications for the design, construction and acceptance of non-metallic pipelines. Part 1: High pressure fiberglass reinforced plastic linepipes |
|||
GB/T 5258-2008 纤维增强塑料面内压缩性能试验方法(中英文版) Fiber-reinforced plastic composites - Determination of compressive properties in the in-plane direction |
找到:33條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |